Railway workshop equipment
Teсhvagonmash offers comprehensive solutions for the development of design documentation in the field of new construction, technical re-equipment and reconstruction of enterprises for the repair of freight and passenger cars (car repair plants and depots). Tekhvagonmash solves issues of comprehensive design in all parts and sections of the project - from the selection of the construction site to the turnkey delivery of the facility.

The system for dismantling and washing axle boxes and bearings is intended for use at railway car repair factories (car…

Headstock and tailstock positioners are used in various industries to place, lift and swivel frame steelwork into a suitable welding…

The automated wheel set cleaning and washing station is designed for pressure washing of freight railcar wheelsets with a heated…

The blast rooms is designed for shot blasting of wagons up to the 2nd degree of cleaning according to Sa…

The turntable is designed to rotate the wagon bogie by 90°. Specifications: Carrying capacity, t5Rotation angle, °90Swing drive typepneumaticThrust drive…

The lifting and turning device is designed to lift and turn the wheelset by 180°. The device operates as part…

The turntable is designed to roll wheelsets along rails intersecting at an angle of 90° when performing technological operations. Specifications:…

An axle-box body washing plant is designed for bearing extrusion and washing of axle-box housings for freight cars by means…

Bearing washing plant is designed for washing and drying of roller bearings installed on freight and passenger cars as well…

The automated station is designed for high-pressure washing of railcar bogie frames with heated detergent solution, followed by rinsing with…

1. Manipulator10. Chain two-stack conveyor2. Feed conveyor11. Feeding device3. Crook mounting and their strengthening12. Knuckle-joint and balancing manipulator4. Hatch assembly13.…

The lifting jacks is designed for performing of process operations on wagon lifting. Advantages Lifting control is performed from one…