Plant for riveting

Plant for riveting

The plant ensures a complex of manufacturing operations of riveting. The plant includes a hydroelectric power station, an heating unit of rivets and a riveting device with a staple. 
The hydroelectric power station provides the oil pressure. The riveting process includes a pump, a control unit and a tank (housing). The heating unit of rivets heats rivets and has a metal framework with lining with refractory bricks. The work area has 11 silicon-carbide heaters on 2 busses which supplies electric power. 
The riveting staple is a working unit in riveting process. The staple housing includes a hydraulic actuator and squeezing elements and is a force part of the staple. The hydraulic actuator increases the riveting force and ensures the vertical stroke of squeezing elements, which form rivet heads in the joints. 
The staple is connected to the hydroelectric power station by high pressure hoses. The balanced suspension ensures the staple maneuverability with minimal force vertically and includes 2 spring balancers. The rotating console ensures the staple maneuverability aflat. 

Specifications



1

Riveting staple

Staple typ

Hydraulic, hinged

Max. rivet dia.

16

Capacity, cycles per minute

10

Riveting force, kN

130

Rotating angle

270º

Staple stroke, mm

130

Vertical staple stroke, mm

± 600

Horizontal staple stroke, mm

1280

Distance between squeezing elements, mm

107; 137

2

Hydroelectric power station

Drive type

Electrical

Capacity, litres per minute

30

Pressure. Mpa

13

Engine power, Kw

11

3

Heating unit of rivets

Heating time, minutes

40

Amount of rivets heated simultaneously

63

Heating TºC

900-1000

Power consumption, Kw

40

Power source

Rectifier welder ВС-600 С

Current, A

630

4

Balanced suspension


Balancer type

No. 9414


Manufacturer

Italy


Load capacity, kgs

90-100