The shot blasting chamber cleans pipes removing scale, dirt and rust. The chamber with protection has a closed metal construction covered inside with rubber sheets to absorb cinematic shot energy. The pipes are directed in translation and rotation motions, one after another, by a transport device into the shot blasting chamber where they are cleaned.
Shotblasters build-up a high-velocity directional metal shot stream. The shotblaster construction allows to form and regulate the directional stream. The regeneration of used shots takes place continuously in closed cycles charging shots by a screw conveyor an elevator into the separator, shot eliminator and then into the hopper.
By request of the Customer we can deliver roller conveyors, stowers, removers and air cleansing systems

Air ventilation system consists of a filter unit, a radial fan, airways and provides the suction of dirty air out of the working chamber as well its cleansing. The filter unit consists of an upper and a lower sections which are made of rolled ferrous metal. In the upper part there are 8 filter cartridges and a system which shakes the cartridges removing the dust. To make the maintenance convenient there are hatches with removable covers. In the power section there are air collecting hoppers with gates to discharge collected dust. There is an operating floor to service the upper section. The exhaust in the ventilation system is provided by a fan mounted on a separate frame which is fixed on the floor by anchor bolts. The airways provide interaction among the working chamber, the fan and the filter unit.