Automized Wheelpair Cleaning and Washing Station

Research-and-production enterprise "Techvagonmash"

prospekt Poltavsky 2-D, Kremenchuk, Poltava region, Ukraine, 39627

Tel. +38 (0536) 77-69-98
Fax +38 (0536) 77-34-87
E-mail: market@tvagonm.com.ua

	The system is designed to clean wheelpairs hydroabrasively and to wash them after that with clean water.
Principle of operation The wheelpair is placed by elevating mechanism into washing chamber and put on the elevating mechanism rollers. The chamber doors close, and a command is sent to rotate and to clean the wheelpair. After cleaning the commands are sent to swill, then to open the door and to bring the wheelpair to the warehouse.

Specifications

1.	Dimensions of handling workpiece, mm
	Length, mm	2300
	Wheel Ø (rolling circle)	Ø950
2.	Workpiece weight, kg	1180
3.	Wheelpair cleaning time, min	10 … 15
4.	Wheelpair rotation speed, RPM	10
5.	Sand consumption per wheelpair, m³	0,02
6.	Quantity of sandblasting heads	5
7.	Water tank volume	2000
8.	Sand hopper volume, m³	1,3
9.	High pressure system (5 modules)	CAT PUMPS 530
	Max pressure, MPa	22
	Max water consumption, l/min	5х22=110
	Electric drive power, kW	5х7,5=37,5
10.	Wheelpair swilling pump	Electric pump system К65-50-160а
	Pressure in the pump, MPa	0,25
	Capacity, m³/h	20
	Electric drive power, kW	4
11.	Wheelpair rotating drive	Reduction gearmotor NMRV075
12.	Elevating (sinking) mechanism for wheelpairs
	Drive type	Pneumatic
	Quantity of pneumocylinders	2
13.	Door lifting drive
13.	Drive type	Pneumatic
14.	Wheelpair kicker drive
14.	Drive type	Pneumatic
15.	Sandblasting heads
15.	Drive type	Pneumatic
16.	Elevating (sinking) drive for sandblasting heads
16.	Drive type	Pneumatic
17.	Wheelpair axle swilling drive
17.	Drive type	Pneumatic
18.	Pressure in hydraulic system, MPa	0,4…0,6
19.	Adjusted power, Kw	43
20.	Dimensions, mm	7450х4890х3060
21.	Weight (without water and sand), kg	7700

Development
of site:

design studio
Webdream Inc.