Axle-Box Housing Waching Plant

Research-and-production enterprise "Techvagonmash"

prospekt Poltavsky 2-D, Kremenchuk, Poltava region, Ukraine, 39627

Tel. +38 (0536) 77-69-98
Fax +38 (0536) 77-34-87
E-mail: market@tvagonm.com.ua

	is designed for bearing extrusion and washing of axle-box housings for passenger cars by means of washing agent and is used in railway repair shops (locomotive depots and railway-carriage repair works) to change old and life-expired technical parts) as well to improve existing manufacturing methods where, as usual, a great deal of hand work is needed.

Specifications

No.	Index	Value
1.	Axle-box
	Type	For passenger cars
	Outer Ø	250
	Weight, kg	65
2.	Extrusion block
	Extrusion force, kg	5000
	Hydraulic plant	ГС08.100.000
	Feed, l/min	8,0
	Pressure, MPa (kgf/cm²)	6,3 (63)
	Pump motor power, kW	1,5
3.	Plant capacity (clean housings), piece/h	15-30
4.	Amount of washing sections	1
5.	Washing time, min	2-4
6.	Washing agent temperature, °С	35 - 95
7.	Washing agent pump	К65-50-160-С5
	Pump capacity MPa (kgf/cm²)	0,32 (3,2)
	Pump capacity, m³/h	25
	Pump drive power, kW	5,5
	Washing agent mass in the tank, kg	1150
8.	Tank volume, m³	1270
9.	Washing agent heating	Dry water vapour by electrical heaters
10.	Water vapour pressure, MPa (kgf/cm²)	0,3 (3,0)
11.	Dry water vapour consumption, kg/h	до 35
12.	Power of electrical heating, kW	31,5
13.	Dimensions, mm	3600х1780х2680
14.	Plant weight without washing agent, kg	1800

Development
of site:

design studio
Webdream Inc.